QuadTech Inc

The Guardian 6200 is designed for fast, easy, production testing of electrical products such as blenders, fans, and other small appliances in accordance with UL, CSA, and IEC standards. Without changing the connection to the product, the tester is able to perform all the essential electrical safety tests in one unit, including AC/DC Hipot, Insulation Resistance, Ground Bond, Current Draw and Power Consumption measurements. Performing all these tests in one box increases production by reducing test time and eliminating multiple test stations.

AC Hipot Test Performs AC dielectric testing (hipot) over the voltage range from 50 to 5000VAC RMS. Leakage current detection is programmable from 1ľA to 40mA, making the 6200 ideal for testing medical products and instruments having a wide range of leakage currents.

DC Hipot Test DC dielectric testing is possible from 50 to 6000VDC with leakage current detection down to 0.1ľA. The maximum total output current of 20mA allows quick charging of capacitive devices and products.

Insulation Resistance The insulation resistance test (similar to DC Hipot) calculates and displays a product’s insulation resistance value in ohms. This resistance can be measured over the range of 100kW to 50GW with test voltages programmable from 50 to 1000VDC.

Ground Bond The ground bond test, sometimes referred to as a high current continuity test, can be programmed from 1 to 30A for verifying the integrity of a product’s ground system. Resistance measurements are displayed and a high limit programmable between 0.1mW and 510mW.

Power Monitoring/Functional The 6200 can monitor voltage across, current draw, or power consumption of the product under test. This allows a manufacturer to functionally test the product and verify that power consumption is within acceptable limits after performing the final electrical safety tests. Additionally, for compliance testing of electrical products, the analyzer can perform line/earth leakage tests in four possible configurations, five human body models, with programmable limits from 0.1ľA to 9.999mA.

Note: This test requires input isolation transformer for proper operation

USES:

• Production Testing of Electrical Products such as Blenders, Fans and Other Small Appliances, in Accordance with UL, CSA, and IEC Standards
• Electrical Safety Compliance Testing on a Variety of Products and Devices

FEATURES:

• Programmable output voltage to 5KV AC and 6KV DC
• Ground Bond Testing to 30A AC with Adjustable Limit
• Monitoring of DUT Current Draw
• Monitoring of DUT Power Consumption
• Line/Earth Leakage Current Measurement (UL1563/UL1950)with 5 Human Body Models
• Insulation Resistance Measurements from 100kW to 50GW
• Programmable Ramp and Test Times
• Storage of 50 Tests Setups with 10 Steps per Setup
• Continuous Leakage Current Monitoring
• Trip Current Programmable to 40mA AC and 20mA DC
• Front Panel Lockout via Password
• Standard IEEE and Remote Control Interfaces
• Optional RS232 Interface